30MN35MN Open Die Forging Press

Ref no. HBFU43005

 

 

 

Technical Specification of 30MN35MN Open Die

Forging Press

1	Nominal forging, cogging force (static working pressure of 320 bar)	30MN(3000tons)
2	Upsetting force (static working pressure of 350 bar)	35 MN (3500 tons)
3	Maximum press stroke	2000 mm
4	Press daylight	3000 mm
5	Distance between column inside (clear width)	3000mm × 1460mm
6	Number of pull back cylinders	2
7	Die magazine	4 Die magazine
8	Forging tolerance measures on hot workpiece	±2 mm
9	Die Table area (width × length ×stroke)	2000 mm × 4000 mm × 3000mm
10	Press speeds - Forging speed at 30 MN - Upsetting speed at 35 MN	1-70 mm/sec 1-35 mm/sec
	- Advance speed. Fast/slow - Return speed. Fast/slow - Die table slide forward.Fast/slow	1-300 mm/sec / 10mm/sec 1-300 mm/sec / 10mm/sec 1-250 mm/sec / 5mm/sec
11.	Press forces    - Forging at 320 bar    - Upsetting at 350 bar    - Return at 320 bar    - Table shift at 250 bar    - Tool change and rotate at 150bar - Die magazine    - Die shift	30 MN (3000 tons) 35 MN (3500 tons) 3.0 MN (300 tons) 0.94 MN (94 tons) 0.5MN(50Tons) 1.5MN(150Tons) 1.0MN(100Tons)
12	Hydraulic pumps	8 sets × Axial piston pump, Oilgear        Pressure rate 400bar        Working pressure 350bar
13.	Electric motors    - 4 sets × main motors      - 2 sets × boost motor    - 1 set × pilot pump    - 1set × cooling and filtering motor    - 1set × Auxiary motor	500kw, 3300volt,1200rpm.        double end shaft 90kw,440volt,1800rpm 60kw, 440volt, 1800rpm 150kw, 440volt,3600rpm 90kw, 440volt, 1800rpm

 

For any inquiries,  Don't hasitate to contact us!

 

Address -

 

Head Office  :  699-1, HBE B/D, Ahnyoung-Dong, Jung-Gu, Daejeon,
                        Korea Rep.

The Plant     :  593-1, Gapsan-Ri, Angang-Eup, Gyeongju-Si, Gyeongbuk,

                 Korea Rep.

 

 

Contact Info -

Head Tel : (+82)42-584-8750                    Head Fax : (+82)42-584-8751

E-mail     :  hbepress@hbepress.com    web site : www.hbepress.com

 

Person in charge : Rachel Kim