60MN/80MN Four Column Push Down Open Die Forging Press(Brand new)

Ref no. HBFU43009

 

Technical Specification of 60MN/80MN Four Column Push Down Open Die Forging Press

1.	Nominal force (static working pressure of 320 bar)			60MN (6000 tons)
2.	Upsetting force (static working pressure of 420 bar)			80MN (8000tons)
3.	Maximum press stroke			2600 mm
4.	Press daylight			6000 mm
5.	Press force stage, at 320 bar - 1 stage (one-central cylinder) - 2 stage (two-side cylinders) - 3 stage (three-all cylinders)			20 MN (2000tons) 40 MN (4000 tons) 60 MN (6000 tons)
6.	Distance between column			1880 mm × 4580 mm
7.	Number of pull back cylinders			4
8.	Eccentric loading at 60MN-in line of forging : mm at right angle to line at forging			300 mm either side 600 mm press center
9.	Forging tolerance measured on hot work piece			± 1 mm
10.	Die Table area (width × length ×Stroke)			3200 mm × 6000 mm × 3000 mm× 3000 mm
11.	Die magazine			Four (4) - die magazine
12.	Tolerance of lower dies to be shifted			± 2 mm
13.	Press speeds - Forging speed at 60MN(6000ton) - Upsetting speed at 80MN(8000ton)  - Advance speed. Fast / slow - Return speed. Fast / slow - Die table slide forward. fast/ slow			Max.85 mm/sec Max.40 mm/sec 250-300 mm/sec/10mm/sec 250-300 mm/sec/10mm/sec
				250 mm/sec /5 mm/sec
14.	Press forces      - Forging at 320 bar    - Upsetting at 420 bar    - Return at 300 bar    - Table shift at 300 bar    - Die shift at 300 bar    - Die magazine at 300 bar    - Top die clamping at 50 bar			60MN (8000 tons) 80MN (8000 tons) 8.0 MN (800 tons) 2.0 MN (200 tons) 1.0 MN (100 tons) 2.0 MN (200 tons) 0.1 MN (10 tons)
15.	Number of press stroke
	Press stroke	Penetration	Return stroke	Stroke per minute
	3 cylinders	150 mm	300 mm	10/12
	3 cylinders	100 mm	200 mm	14/16
	2 cylinders	100 mm	200 mm	20/22
	2 cylinders	50 mm	100 mm	30/32
	1 cylinder	5 mm	20 mm	90/92

 

For any inquiries,  Don't hasitate to contact us!

 

Address -

 

Head Office  :  699-1, HBE B/D, Ahnyoung-Dong, Jung-Gu, Daejeon,
                        Korea Rep.

The Plant     :  593-1, Gapsan-Ri, Angang-Eup, Gyeongju-Si, Gyeongbuk,

                 Korea Rep.

 

 

Contact Info -

Head Tel : (+82)42-584-8750                    Head Fax : (+82)42-584-8751

E-mail     :  hbepress@hbepress.com    web site : www.hbepress.com

 

Person in charge : Rachel Kim